Breadcrubs

CARPARK WHEEL BARRIER


DURA CRIB® Carpark Wheel Stops are manufactured from ultra-tough recycled high density polyethylene for extreme durability. Unlike most other wheel stops the dura crib product is made from solid yellow material and U.V stabilised.

  • Preventing front skirt of legal height vehicles being damaged by kerbs of heights greater than 100mm
  • Controlling the kerb overhang where inconvenient or hazardous to pedestrians
  • Inhibiting vehicle contact with end barriers
  • Inhibiting vehicle contact with building walls
  • Inhibiting encroachment into an opposing parking space
  • Prevent nuisance impacts with carpark barriers

  • Solid construction
  • 95mm High x 150mm Wide x 1650mm Long
  • Easy installation
  • Physical dimensions compliant to Australian Standard AS2890.1:2004
  • High visibility yellow
  • 100% recycled high density polyethylene (HDPE) construction for durability
  • Resistant to fuels, oil and most commonly used chemicals
  • 50 Year warranty against splitting, rotting, absorption, termites and mould



* Total Block Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the cribbing block.

Warning: Always perform your own risk assessment before using this product. Always know the weight of the equipment or machine being supported. Consult your equipment and machinery manufacturer manual and guidelines for recommended blocking and lifting points. Never exceed the maximum WLL of the cribbing blocks or cribs. Under no circumstances does the WLL mentioned above take into consideration point loading or uneven weight distribution of the supported load. Copies of Technical Data Sheets and the Technical Operating Manual for Composite Cribbing can be obtained from the resource page of this web site, emailing info@cribandmatco.com.au or calling 02 9674 7428.