Breadcrubs

DURA CRIB® FAST STEP CHOCKS


DURA CRIB® FAST STEP CHOCKS are active cribbing products. The primary use of step chock is in vehicle stabilisation applications rescue, forklift and small machinery maintenance. Available in 3 sizes to suit small, medium and large stabilising applications. The tiered slanted step design is to provide maximum hold.

  • Available in small, medium and larger sizes
  • Tiered slanted step design
  • Sable wide base
  • Standard black or Hi-visibility yellow finish.
  • Tested under the guidance of AS1170.0.2002 and AS2498.3.1998
  • 100% recycled high density polyethylene (HDPE) construction for durability
  • Lightweight
  • Resistant to fuels, oils and most common chemicals
  • Will not splinter or rot
  • Non-conductive
  • Sturdy lanyard for ease of handling
  • Operating Temperature range -40°C to +75°C
  • 50 year warranty against splitting, rotting, absorption, termites and mould



* Total Block Working Load Limit (WLL) is based on a full press load evenly distributed across the top and bottom surfaces of the cribbing block.

Warning: Always perform your own risk assessment before using this product. Always know the weight of the equipment or machine being supported. Consult your equipment and machinery manufacturer manual and guidelines for recommended blocking and lifting points. Never exceed the maximum WLL of the cribbing blocks or cribs. Under no circumstances does the WLL mentioned above take into consideration point loading or uneven weight distribution of the supported load. Copies of Technical Data Sheets and the Technical Operating Manual for Composite Cribbing can be obtained from the resource page of this web site, emailing info@cribandmatco.com.au or calling 02 9674 7428.